NO -
Repair the connector or terminals if possible, or replace the harness, and retest.?
8. Check that the appropriate wheel speed sensor is properly mounted See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems/Wheel Speed Sensor/Service and Repair.
Is the wheel speed sensor installation OK?
YES -
Go to step 10.
NO -
Reinstall the wheel speed sensor See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Wheel Speed Sensor/Service and
Repair, then go to step 1.?
9. Turn the ignition switch to LOCK (0).
10. Disconnect the VSA modulator-control unit 46P connector.
11. Start the engine.
12. Measure the voltage between body ground and the appropriate wheel speed sensor +B and GND terminals of the VSA modulator-control unit
46P connector individually (see table).
Is there 0.1 V or more?
YES -
Repair a short to power in the wire between the VSA modulator-control unit and the appropriate wheel speed sensor.?
