and the MICU.?
B1355
DTC Troubleshooting: B1355
DTC B1355:
Power Tailgate Control Unit Lost Communication with MICU (MICU Message)
NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A See: Powertrain
Management/Computers and Control Systems/Information Bus/Testing and Inspection/Component Tests and General Diagnostics/Troubleshooting
- B-CAN System Diagnosis Test Mode A.
1. Clear the DTCs with the HDS.
2. Turn the ignition switch to LOCK (0) and then back to ON (II).
3. Wait for at least 6 seconds.
4. Check for DTCs with the HDS.
Is DTC B1355 indicated?
YES -
Go to step 5.
NO -
Intermittent failure, the power tailgate control unit is OK at this time. Check for loose or poor connections between the power tailgate control unit
and the MICU.?
5. Check for DTCs with the HDS.
Are DTCs B1055, B1157, B1255, B1955, B2155, and/or B1806 also indicated?
YES -
Do the MICU input test See: Powertrain Management/Computers and Control Systems/Information Bus/Testing and Inspection/Component Tests
and General Diagnostics/MICU Input Test.?
NO -
Do the power tailgate control unit input test See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Power Trunk / Liftgate Control
Module/Service and Repair.?
B1356
DTC Troubleshooting: B1356, B1358
DTC B1356:
Power Tailgate Control Unit Lost Communication with Driver's MPCS Unit (DRLOCKSW Message)
DTC B1358:
Power Tailgate Control Unit Lost Communication with Driver's MPCS Unit (ASLOCKSW Message)
NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A See: Powertrain
Management/Computers and Control Systems/Information Bus/Testing and Inspection/Component Tests and General Diagnostics/Troubleshooting
- B-CAN System Diagnosis Test Mode A.
1. Clear the DTCs with the HDS.
2. Turn the ignition switch to LOCK (0) and then back to ON (II).
3. Wait for at least 6 seconds.
4. Check for DTCs with the HDS.
