Is there continuity?
YES -
Go to step 21.
NO -
Repair an open in the wire.?
21. Disconnect the power telescopic motor/position sensor 6P connector.
22. Check for continuity between power tilt motor/position sensor 8P connector terminal No. 5 and body ground.
Is there continuity?
YES -
Repair a short to ground in the wire.?
NO -
Go to step 23.
23. Reconnect power tilt/telescopic steering control unit connector A (16P).
24. Turn the ignition switch to ON (II).
25. Measure the voltage between power tilt/telescopic steering control unit connector A (16P) terminals No. 2 and No. 16.
