Repair an open in the wire.?
13. Check for continuity between body ground and power tilt/telescopic steering control unit connector A (16P) terminals No. 4 and No. 12
individually.
Is there continuity?
YES -
Repair a short to ground in the wire.?
NO -
Go to step 14.
14. Reconnect power tilt/telescopic steering control unit connector A (16P).
15. Turn the ignition switch to ON (II).
16. Measure the voltage between power tilt motor/position sensor 8P connector terminals No. 6 and No. 8 and between terminals No. 7 and No.
8.
Is there about 5 V?
YES -
Faulty power tilt motor/position sensor, replace the tilt motor assembly.?
NO -
If there is no voltage, replace the power tilt/telescopic steering control unit. If there is battery voltage, repair a short in the wire.?
17. Turn the ignition switch to LOCK (0).
18. Disconnect power tilt/telescopic steering control unit connector A (16P).
19. Disconnect the power tilt motor/position sensor 8P connector.
20. Check for continuity between power tilt/telescopic steering control unit connector A (16P) terminals No. 2 and No. 16 and power tilt
motor/position sensor 8P connector terminals No. 5 and No. 8 respectively.
