Go to step 50.
NO -
Faulty right side impact sensor (first); replace the right side impact sensor (first) See: Restraints and Safety Systems/Air Bag Systems/Impact
Sensor/Service and Repair/Side Impact Sensor (First) Replacement, then clear the DTC.?
50. Turn the ignition switch to LOCK (0).
51. Disconnect the negative cable from the battery, then wait at least 3 minutes.
52. Disconnect SRS unit connector B (39P) from the SRS unit.
53. Disconnect the floor wire harness 4P connector from the right side impact sensor (first) See: Restraints and Safety Systems/Air Bag
Systems/Impact Sensor/Service and Repair/Side Impact Sensor (First) Replacement.
54. Measure the resistance between floor wire harness 4P connector (right side impact sensor (first)) terminals No. 2 and No. 3. There should be
an open circuit or at least 1 MOhms.
Is the resistance as specified?
YES -
Go to step 55.
NO -
Short to another wire in the floor wire harness between the SRS unit and the right side impact sensor (first); replace the floor wire harness, then
clear the DTC.?
55. Measure the resistance between body ground and floor wire harness 4P connector (right side impact sensor (first)) terminals No. 2 and No. 3
individually. There should be an open circuit or at least 1 MOhms.
Is the resistance as specified?
YES -
Go to step 56.
NO -
Short to ground in the floor wire harness between the SRS unit and the right side impact sensor (first); replace the floor wire harness, then clear
