NO -
Intermittent failure, the system is OK at this time.?
5. Go into the Diagnostic Menu, and select the Self-Diagnosis Mode in the Select Diagnosis Items menu See: Accessories and Optional
Equipment/Navigation System/Testing and Inspection/Initial Inspection and Diagnostic Overview/Navigation System Diagnostic Mode.
6. Select the System Links, then select the RES.
Is Connection OK indicated?
YES -
Replace the rear controller and screen See: Accessories and Optional Equipment/Entertainment Systems/Entertainment System Control
Panel/Service and Repair.?
NO -
Do the DTC 2708 troubleshooting See: 2708.?
1701
Navigation System DTC Troubleshooting: 1701, 2608
DTC 1701:
Rear Camera Error
DTC 2608:
Rear Camera Diag
NOTE:
- Check the vehicle battery condition first See: Starting and Charging/Battery/Testing and Inspection/Component Tests and General
Diagnostics/Battery Test.
- These navigation DTCs set when a communication error between the rearview camera and the navigation display (open or short) is detected.
- Check any official Honda service website for more service information about the navigation system.
- Before you troubleshoot, make sure to follow the general troubleshooting information See: Accessories and Optional Equipment/Navigation
System/Testing and Inspection/Initial Inspection and Diagnostic Overview/How to Troubleshoot the Navigation System.
1. Clear the hard error code.
2. Turn the ignition switch to LOCK (0), and then back to ON (II).
3. Go into the Diagnostic Menu, and select the Self-Diagnosis Mode in the Select Diagnosis Items menu.
4. Check the System Links.
Is the Rear camera icon red?
YES -
Go to step 5.
NO -
Intermittent failure, the system is OK at this time.?
5. Turn the ignition switch to LOCK (0).
6. Check for poor connections or loose terminals at rearview camera 6P connector.
Are there connections OK?
YES -
Go to step 7.
NO -
Repair poor connection or loose terminal.?
