23. Measure the voltage between body ground and the appropriate TPMS control unit 20P connector terminal (see table).
Is there battery voltage?
YES -
Repair a short to power in the wire between the TPMS control unit and the appropriate initiator.?
NO -
Replace the TPMS control unit See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring System/Tire Pressure Module/Service and
Repair.?
VSA System
VSA DTC Troubleshooting: 53
DTC 53:
Motor Stuck
NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information.
1. Turn the ignition switch to ON (II).
Is the pump motor running?
YES -
Replace the VSA modulator-control unit See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Traction Control
Module/Service and Repair.?
NO -
Go to step 2.
2. Turn the ignition switch to LOCK (0).
3. Disconnect the VSA modulator-control unit 46P connector.
4. Check for continuity between VSA modulator-control unit 46P connector terminal No. 46 and body ground.
