YES -
Faulty SRS unit or poor connection at SRS unit connector B (39P) and the SRS unit. Check the connection between the connector and the SRS
unit. If the connection is OK, replace the SRS unit See: Relays and Modules/Relays and Modules - Restraints and Safety Systems/Air Bag Control
Module/Service and Repair/SRS Unit Replacement.?
NO -
Open in the front passenger's seat wire harness, floor wire harness, or poor connection. Check the connection; if the connection is OK, replace the
faulty harness, then clear the DTC.?
11. Turn the ignition switch to LOCK (0).
12. Disconnect the front passenger's seat wire harness 3P connector (A) from the front passenger's seat belt buckle switch 3P connector (B).
13. Unbuckle the front passenger's seat belt.
14. Measure the resistance between front passenger's seat belt buckle switch 3P connector terminals No. 2 and No. 3. There should be less than
1.0 Ohms.
Is the resistance as specified?
YES -
Go to step 15.
NO -
Faulty front passenger's seat belt buckle switch; replace the front passenger's seat belt buckle assembly, then clear the DTC.?
15. Disconnect the negative cable from the battery, then wait for 3 minutes.
16. Disconnect SRS unit connector B (28P) from the SRS unit.
17. Measure the resistance between SRS unit connector B (39P) terminal No. 21 and front passenger's seat wire harness 3P connector terminal
No. 2.There should be less than 1.0 Ohms.
