Is there battery voltage?
YES -
Replace the left BSI radar unit See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Blind Spot
Module/Service and Repair/BSI Radar Unit Removal/Installation.?
NO -
Go to step 9.
9. Measure the voltage between left BSI radar unit 6P connector terminal No.2 and body ground. There should be battery voltage.
Is there battery voltage?
YES -
Repair an open in the wire between the left BSI radar unit 6P connector and G702.?
NO -
Repair an open in the wire between the TECH relay in the auxiliary under-hood fuse/relay box and the left BSI radar unit.?
B18A8
DTC Troubleshooting: B18A8
DTC B18A8:
Right BSI Radar Unit Voltage Input Low
1. Clear the DTCs with the HDS.
2. Turn the ignition switch to ON (II), then wait for 20 seconds.
3. Check for DTCs with the HDS.
Is DTC B18A8 indicated?
YES -
Go to step 5.
NO -
Intermittent failure, the system is OK at this time.?
4. Turn the ignition switch to LOCK (0)
