NO -
Intermittent failure, the system is OK at this time. Check for loose or poor connections between the power seat control unit and the driver's MPCS
unit.?
5. Check for DTCs with the HDS.
Are DTCs B1013, B1015, B1065, B1182, B1356, B1358, and B1905 also indicated?
YES -
Do the driver's MPCS unit input test See: Powertrain Management/Computers and Control Systems/Information Bus/Testing and
Inspection/Component Tests and General Diagnostics/Power Windows (Drivers MPCS Unit) Input Test.?
NO -
Do the power seat control unit input test See: Body and Frame/Relays and Modules - Body and Frame/Power Seat Control Module/Testing and
Inspection/Power Seat Control Unit Input Test.?
B1825
DTC Troubleshooting: B1825
DTC B1825:
Power Seat Slide Motor Pulse Error
NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A See: Powertrain
Management/Computers and Control Systems/Information Bus/Testing and Inspection/Component Tests and General Diagnostics/Troubleshooting
- B-CAN System Diagnosis Test Mode A.
1. Turn the ignition switch to LOCK (0) and then back to ON (II).
2. Clear the DTCs with the HDS.
3. Operate the power seat adjustment switch in all directions for at least 6 seconds each.
4. Check for DTCs with the HDS.
Is DTC B1825 indicated?
YES -
Go to step 5.
NO -
Intermittent failure, the slide position sensor is OK at this time. Check for loose or poor connections at the power seat control unit connector.?
5. Check for DTCs with the HDS.
Is DTC B1836 also indicated?
YES -
Go to the DTC B1836 troubleshooting See: B1836.?
NO -
Go to step 6.
6. Check for DTCs with the HDS.
Are DTCs B1826, B1827 and/or B1828 also indicated?
